Free tool · EU and UK carbon border adjustment · version 0.1
Default values or your own emissions? What CBAM costs your buyer per tonne, 2026 to 2034
For South African makers of steel articles, fasteners, wire, aluminium extrusions, fertiliser and cement. Pick your product and tonnes, and see the EU bill per tonne on the default value plus mark-up, what your own verified emissions would save, and how many tonnes pay for the measuring. Nothing you enter leaves your browser.
Built by Beyond Data in Johannesburg from the Official Journal text and HMRC guidance, not from third-party calculators. An aid for analysis, not legal, customs or verification advice.
The shape of it: fasteners (CN 7318 15)
South Africa's EU default value is 4,030 tCO2e per tonne. Cost to the EU buyer per tonne on that default, certificate price held at the latest published level:
| Year | Mark-up | Free allocation still given | EUR per tonne |
|---|---|---|---|
| 2026 | 10 % | 97,5 % | 245 |
| 2028 | 30 % | 90 % | 330 |
| 2030 | 30 % | 51,5 % | 373 |
| 2034 | 30 % | 0 % | 431 |
Hand-checked: (4,030 × 1,30 − 0,90 × 1,364) × EUR 82,32 = EUR 330,22 in 2028. 2026 uses the mean of the published quarterly prices. A figure you can verify well below the default saves the difference.
What it does
The default bill, year by year
South Africa's Annex I default value for your product (or the "other countries" value where South Africa has no row, as for cement), plus the mark-up, minus the free allocation the EU still gives its own producers, times the certificate price. Euro and rand, 2026 to 2034.
Your own figure against it
Enter a verified figure per tonne and see the saving per tonne and per year at your tonnage, with the cost never below zero and the South African carbon tax you actually paid counted where the rules allow it.
"Is it worth measuring?"
The break-even figure your emissions must beat, what each 0,1 tCO2e/t is worth, the tonnes a year that cover a verifier's yearly cost, and the payback year. The cost figures are placeholders you replace with a quote.
A UK line
UK CBAM starts a year later and works differently: one default value per 8-digit code, a sector rate set quarterly. The UK numbers are indicative, built on HMRC's draft notice and illustrative rates, and are labelled that way.
A summary to print
One page for the finance director, with the inputs, the assumptions and their sources, and the data request to hand to your plant manager. Save it as a PDF from your browser.
Private by design
It runs in your browser. Nothing is uploaded or stored, and the page's security policy forbids network connections. Every value says where it comes from, and every assumption is yours to change.
The dates that matter
- 1 January 2026: the EU's definitive CBAM period began. Goods imported from this date count, so 2026 shipments are already in play.
- 31 July 2026: Implementing Regulation (EU) 2026/1740 corrected the default values in Annex I of 2025/2621 and applies from 1 January 2026. The legally binding values are in the Official Journal text; the Commission's Excel is for information.
- 1 January 2027: UK CBAM starts. First return, for the whole of 2027, is due 31 May 2028; HMRC registration opens 1 January 2028.
- 1 February 2027: EU member states start selling CBAM certificates. From 2027 an importer must hold certificates for at least half of the emissions it has imported so far, at the end of each quarter.
- 30 September 2027: first EU declaration and surrender, for 2026 imports. Verified actual emissions have to be in hand by then to be used for 2026.
- December 2027: the Commission must have revised the default values and mark-ups, so the numbers in this tool can change.
- 2028: the mark-up reaches 30 % for steel, aluminium and cement. 2034: free allocation for EU producers ends, so the deduction is zero.
Who pays, and what you have to give your importer
The EU importer is the one who buys and surrenders certificates, so the bill lands on your buyer. They have two ways to get it down: price you lower, or ask you for verified emissions for the product they buy. If you have none, they are charged on the default value plus the mark-up, which is built to be higher than a typical installation's figure.
To use your own figure the buyer needs, per product, the verified embedded emissions, the production route, the emissions of the precursors you buy in (steel rod, billet, clinker, ammonia), the verifier's report, and your installation registered in the CBAM registry. The calculator's printed summary ends with that data list for your plant manager.
Where the money is, by sector: steel and aluminium are billed on direct emissions only, so South Africa's coal-heavy grid does not raise the bill, but the steel default assumes blast-furnace steel, so a scrap-based electric-arc supplier can beat it by a wide margin. Cement and fertilisers are billed on direct and indirect emissions, and the fertiliser mark-up is only 1 %, so measuring gains less there unless your plant is cleaner than South Africa's average.
Questions
Is the EU carbon border adjustment mechanism (CBAM) already charging South African exports?
Yes, in the sense that goods imported into the EU from 1 January 2026 count. EU importers buy CBAM certificates from 1 February 2027 and must declare and surrender certificates for 2026 imports by 30 September 2027. The UK CBAM is separate and starts on 1 January 2027, with the first return due on 31 May 2028.
Who pays CBAM on a South African export, the exporter or the buyer?
The EU importer (the authorised CBAM declarant) buys and surrenders the certificates. The South African exporter does not pay the EU, but the buyer will pass the cost back in the price or ask for emissions data to reduce it. Importers whose total imports stay below 50 tonnes a year are exempt, which does not help an exporter whose other buyers are above it.
What is a CBAM default value and what is the mark-up?
If an importer has no verified emissions for a product, the EU charges on a default value for the country of origin, set in Annex I of Implementing Regulation (EU) 2025/2621 as replaced by (EU) 2026/1740. For iron and steel, aluminium and cement the default is increased by a mark-up of 10 percent in 2026, 20 percent in 2027 and 30 percent from 2028. For fertilisers the mark-up is 1 percent. The Commission must revise the default values and mark-ups by December 2027.
What does a South African exporter have to give its EU importer?
To use actual emissions instead of the default, the installation needs to be registered in the CBAM registry and supply, per product, the verified embedded emissions with the production route, the verified emissions of bought-in precursors such as steel rod, billet, clinker or ammonia, the verifier's report, and any carbon price paid with independent certification. The verification must be done by an accredited verifier.
How does South Africa's carbon tax reduce a CBAM bill?
Under Article 9 of Regulation (EU) 2023/956 the importer can claim a deduction for a carbon price effectively paid in the country of origin, after any rebate or allowance, with independent certification and proof of payment. With actual emissions that is the tax actually paid. With default values only a yearly default carbon price set by the Commission can be used, and none had been published for South Africa when this page was written. The headline South African carbon tax is R308 per tonne of CO2e from 1 January 2026, but allowances cut what most payers actually pay.
Does South Africa's coal-powered electricity make my steel or aluminium default value expensive?
No. For iron and steel and for aluminium only direct emissions are counted (Annex II of Regulation (EU) 2023/956), so the electricity you buy is not in the figure. It is counted for cement and fertilisers. For steel articles such as fasteners and wire, the number that matters is usually your steel supplier's verified direct emissions per tonne, because the steel is a precursor that makes up most of the figure.
What happens to the free allocation the EU gives its own producers?
It is phased out, and CBAM phases in at the same pace. The share of free allocation still given (the CBAM factor) is 97.5 percent in 2026, 95 percent in 2027, 90 percent in 2028, 77.5 percent in 2029, 51.5 percent in 2030, 39 percent in 2031, 26.5 percent in 2032, 14 percent in 2033 and zero from 2034. The buyer's certificate bill is the embedded emissions minus a deduction equal to that share times a benchmark for the product.
Is the calculator free, and does my data leave my browser?
It is free and needs no sign-up. It runs entirely in your browser: nothing you type is uploaded, nothing is stored, and the page's security policy forbids network connections, so you can check that in your browser's network tab.
Does the calculator replace a verifier or make my CBAM declaration?
No. It is an aid for deciding whether measuring is worth doing and for sizing what your buyers face. Verified emissions need an accredited verifier, the declaration is made by the EU importer, and the calculator does not certify anything or give legal or customs advice.
Sources
Numbers come from the Official Journal and government pages below (accessed 23 October 2026), not from third-party calculators. The calculator's open-source data files carry the same references. Values marked "assumption" on the calculator are not in a primary source.
- Default values and mark-up: Commission Implementing Regulation (EU) 2025/2621 of 16 December 2025 (OJ 31.12.2025), Annex I as replaced by Commission Implementing Regulation (EU) 2026/1740 of 20 July 2026 (OJ 31.7.2026), which applies from 1 January 2026. South Africa and "Other countries and territories" tables. eur-lex.europa.eu/eli/reg_impl/2025/2621/oj; OJ:L_202601740.
- Free-allocation adjustment and benchmarks: Commission Implementing Regulation (EU) 2025/2620 of 16 December 2025 (Equations 2 and 6, point 5 benchmarks); Commission Guidance No 4 (14 August 2026). eur-lex.europa.eu/eli/reg_impl/2025/2620/oj.
- CBAM factor: Directive 2003/87/EC, Article 10a(1a). Cross-sectoral correction factor 100 % for 2026-2030: Commission Implementing Decision (EU) 2026/1862 of 23 July 2026. eur-lex.europa.eu/eli/dec_impl/2026/1862/oj.
- Regulation (EU) 2023/956 as amended by Regulation (EU) 2025/2083 (consolidated 20 October 2025): Articles 2a and Annex VII (50-tonne threshold), 7 and Annex II (direct emissions only for iron and steel and aluminium), 8, 9 (carbon price paid), 20 to 22 (sale, price, surrender), 26 (penalty), 31 (free allocation). eur-lex.europa.eu/eli/reg/2023/956/2025-10-20.
- Certificate price: Commission Implementing Regulation (EU) 2025/2548; quarterly prices for 2026 (Q1 EUR 75,36; Q2 EUR 75,28; Q3 EUR 82,32) on the Commission page Price of CBAM certificates.
- South African carbon tax: National Treasury, 2026 Budget Review, Chapter 4 (R236 to R308 per tonne of CO2e from 1 January 2026). SARS carbon tax page (allowances of 60 % to 95 %). sars.gov.za/types-of-tax/carbon-tax.
- UK: HMRC and HM Treasury, CBAM policy summary, the draft Carbon Border Adjustment Mechanism (Default Values) Force of Law Notice, and Illustrative CBAM rates and worked example (all updated 16 October 2026). gov.uk CBAM policy summary.
- Exchange rates: European Central Bank euro foreign exchange reference rates, 23 October 2026 (ZAR 18,5777; GBP 0,83728).
Not yet in force when this page was written: the Commission's implementing rules on how a carbon price paid abroad becomes a deduction (Article 9(5)) were a draft published in May 2026. Check the Commission's CBAM pages for the final text.
Need the plant data behind the number?
The hard part is usually the data: fuel and process records by product, the precursors you buy in, and a calculation a verifier and your buyer can trace. Beyond Data builds that kind of data model and calculation. We are not a verifier, and verification is done by an accredited verifier we do not replace. Tell us the product and the buyer and we will say whether it is worth doing.